Ruijie RG-AP810-L WiFi AP
Ruijie RG-AP810-L V3 je cenově nejvýhodný WiFi AP s Wi-Fi6, duálním rádiem a dvoupásmovým designem. Je vhodný pro malé a střední podniky, ale disponuje i funkcemi a vysokým výkonem pro nasazení ve velkých podnicích.
Ruijie AP710 je cenově nenáročný přístupový bod 802.11ac s 2x2 MIMO a Dual-band designem s rychlostí přenosu až 1,167 Gbps.
Díky flexibilní správě si může zákazník zvolit Ruijie Cloud Management nebo Hardware Controller pro různé rychle se měnící potřeby.
Bez ohledu na cloudový nebo hardwarový kontrolér je vše integrováno s pokročilou optimalizací, skvělým roamingem a bezpečnou autentizací. AP710 je ideální pro malé a střední podniky, obchodní řetězce a malé hotely.
S 802.11ac dual-band designem je datová rychlost AP710 až 1,167 Gbps, což je dostatečné pro většinu malých kancelářských a maloobchodních prostředí. Navíc AP710 nabízí 100% cloudovou správu, 3letou záruku a poskytuje uživatelům malých a středních podniků dokonalou rovnováhu mezi cenou a výkonem.
Standard 802.11ac s datovou rychlostí až 1,167 Gbps je až 2,5krát než předchozí generace 802.11n.
Není třeba instalovat žádný software. Rychlý provisioning ve čtyřech krocích díky mobilní aplikaci Ruijie Cloud pro iOS a Android.
Technické parametry
Radio | Dual-radio dual-band: | |
Radio 1: 2.4G 11ax/5G 11ax: 2×2 MIMO | ||
Radio 2: 5G 11ax: 2x2 MIMO | ||
Protocol | Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac | |
Operating Bands | 802.11b/g/n/ax :2.4G ~ 2.483GHz | |
802.11a/n/ac/ax : 5.150~5.350GHz,5.47~5.725GHz,5.725~5.850GHz (vary depending on different countries) | ||
Spatial Streams | Up to 4: 2×2:2 in 2.4GHz , 2×2:2 in 5GHz | |
Max Throughput | Maximum throughput (5G+5G mode) per AP: 2.4Gbps | |
Radio1:5G low band 1.2Gbps | ||
Radio2:5G high band 1.2Gbps | ||
2.4G+5G operation mode, maximum throughput per AP: 1.775Gbps | ||
Radio1:2.4G 0.574Gbps | ||
Radio2:5G 1.2Gbps | ||
Modulation | OFDM:BPSK@6/9Mbps,QPSK@12/18Mbps,16-QAM@24Mbps,64-QAM@48/54Mbps | |
DSSS:DBPSK@1Mbps,DQPSK@2Mbps,and CCK@5.5/11Mbps | ||
MIMO-OFDM:BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM | ||
OFDMA (up to 1024-QAM) | ||
Receiver Sensitivity | 11b:-96dBm(1Mbps),-93dBm(5Mbps),-89dBm(11Mbps) | |
11a/g:-91dBm(6Mbps),-85dBm(24Mbps),-80dBm(36Mbps),-74dBm(54Mbps) | ||
11n:-90dBm(MCS0),-70dBm(MCS7),-89dBm(MCS8),-68dBm(MCS15) | ||
11ac HT20:-88dBm(MCS0), -63dBm(MCS9) | ||
11ac HT40:-85dBm(MCS0), -60dBm(MCS9) | ||
11ac HT80:-82dBm(MCS0), -57dBm(MCS9) | ||
11ax HT80:-82dBm(MCS0), -57dBm(MCS9), -52dBm(MCS11) | ||
Antenna | Integrated antenna design | |
Antenna Gain | 2.4G: 3dBi | |
5G: 3dBi | ||
Service Ports | 1 10/100/1000M Ethernet ports, PoE In | |
Management Port | 1 console port | |
Reset Button | Support | |
Anti-theft Lock | Support | |
LED Indicator | 1 LED indicator (Support red, green, blue, orange and flashing mode, which indicates device access) | |
Transmit Power | ≤100mw(20dBm) (vary depending on different countries) | |
Adjustable Power | 1dBm | |
Power Supply | Local power supply (DC 48V/1A) (DC Power adapters should be purchased from third-party vendors separately if needed) | |
PoE (802.3af) – full spectrum operation | ||
Power Consumption | <12.95W | |
Physical Specifications | ||
Temperature | Operating Temperature: -10°C to 50°C | |
Storage Temperature: -40°C to 70°C | ||
Humidity | Operating Humidity: 5% to 95% (non-condensing) | |
Storage Humidity: 5% to 95% (non-condensing) | ||
Installation Mode | Ceiling/wall-mountable | |
Dimensions (W x D x H) | 153mm ×193mm x26mm(Height of the AP only, excluding the mount kit) | |
Weight | ≤0.5kg (include mount kit) | |
IP Rating | IP41 | |
MTBF | 250,000 hours | |
Certifications and Compliance | ||
Wi-Fi Alliance | · Wi-Fi CERTIFIED™ a, b, g, n, ac | |
· Wi-Fi CERTIFIED 6™ | ||
· WPA3™-Enterprise, Personal | ||
· Wi-Fi Enhanced Open™ | ||
· Wi-Fi Agile Multiband™ | ||
· WMM® | ||
Safety Standard | GB4943, EN/IEC 62368-1 | |
EMC Standard | GB9254, EN301 489 | |
Radio Standard | SRRC, EN300 328, EN301 893 | |
Software Specifications | ||
WLAN | Maximum clients per AP | 1024 |
BSSID capacity | Up to 32 | |
SSID hiding | Support | |
5G Priority (Band Steering) | Support | |
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID | Support | |
Remote Intelligent Perception Technology (RIPT) | Support | |
Intelligent device recognition technology | Support | |
Intelligent load balancing based on the number of users or traffic | Support | |
STA control | SSID/radio-based | |
Bandwidth control | STA/SSID/AP-based bandwidth control | |
Data encryption | WPA(TKIP), WPA-PSK, WPA2(AES), WPA3, WEP(64/128 bits) | |
PSK and web authentication | Support | |
PPSK authentication (For Employee) | Support (require wireless controller) | |
802.1x authentication | Support | |
PEAP authentication | Support | |
Data frame filtering | Whitelist, static/dynamic blacklist | |
User isolation | Support | |
Rogue AP detection and countermeasure | Support | |
Dynamic ACL assignment | Support | |
RADIUS | Support | |
CPU Protection Policy (CPP) | Support | |
Network Foundation Protection Policy (NFPP) | Support | |
IP | IPv4 and IPv6 address | Support |
Multicast routing | Multicast to unicast conversion | |
DHCP service | DHCP Snooping, Option 82, Server, Client | |
Management and Maintenance | Supported wireless LAN controllers | Ruijie WS Series Wireless Controller |
Ruijie MACC-Base Software Controller | ||
Ruijie Cloud (Public Cloud) | ||
Management protocol | Telnet, SSH, TFTP, Web | |
Wireless Intelligent AI Optimization Service (WIS) | Support | |
SNMP | SNMPV1,V2c,V3 | |
LLDP | LLDP, LLDP-MED, LLDP-POE | |
Syslog / Debug | Support | |
FAT/FIT/MACC mode switching | Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management | |
Basic Specifications | Radio | Concurrent dual-radio dual-band |
Protocol | 802.11a/b/g/n/ac | |
Wave 2 | ||
Operating Bands | 802.11b/g/n: 2.4GHz to 2.483GHz | |
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries) | ||
Antenna | Built-in Smart Antenna | |
2×2 MU-MIMO | ||
Max Throughput | 400Mbps@2.4GHz | |
867Mbps@5GHz | ||
1267Mbps per AP | ||
Spatial Streams | 2 | |
Modulation | OFDM: BPSK@6/9Mbps | |
QPSK@12/18Mbps | ||
16-QAM@24Mbps | ||
64-QAM@48/54Mbps | ||
DSSS: | ||
DBPSK@1Mbps | ||
DQPSK@2Mbps | ||
CCK@5.5/11Mbps | ||
MIMO-OFDM: | ||
BPSK, QPSK, 16QAM, 64QAM and 256QAM | ||
Receiver Sensitivity | 11b:-91dBm(1Mbps),-88dBm(5Mbps),-85dBm(11Mbps) | |
11a/g:-89dBm(6Mbps),-80dBm(24Mbps),-76dBm(36Mbps),-71dBm(54Mbps) | ||
11n:-83dBm@MCS0,-65dBm@MCS7,-83dBm@MCS8,-65dBm@MCS15 | ||
11ac HT20:-83dBm(MCS0), -57dBm(MCS9) | ||
11ac HT40:-79dBm(MCS0), -57dBm(MCS9) | ||
11ac HT80:-76dBm(MCS0), -51dBm(MCS9) | ||
Maximum Transmit Power | 100mw | |
Adjustable Power | 1dBm | |
IP Rating | IP41 | |
Ports | Service Port | 2 10/100/1000BASE-T Ethernet ports (LAN1 port supports PoE & Uplink) 1 USB port |
Management Port | 1 console port | |
Power | Power Supply | Local power supply (DC 48V) and PoE+ (802.3af/at) |
(DC Power adapters should be purchased from third-party vendors separately if needed.) | ||
Power Consumption | <12.95W | |
WLAN | Maximum clients per AP | Up to 256 |
BSSID capacity | Up to 16 per radio, Up to 32 per AP | |
SSID hiding | Support | |
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID | Support | |
Remote Intelligent Perception Technology (RIPT) | Support | |
X-speed | Support | |
Intelligent load balancing based on the number of users or traffic | Support | |
STA control | SSID/radio-based | |
Bandwidth control | STA/SSID/AP-based speed control | |
Preference for 5GHz (band select) | Support | |
Wireless position tracking | Support | |
Dynamic Frequency Selection(DFS) | Future Release Support | |
Security | PSK, Web, and 802.1x authentication | Support |
Data encryption | WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) | |
SMS authentication | Support | |
PEAP authentication | Support | |
Data frame filtering | Whitelist, static/dynamic blacklist | |
User isolation | Support | |
Rogue AP detection and countermeasure | Support | |
Dynamic ACL assignment | Support | |
RADIUS | Support | |
Wireless Intrusion Detection System(WIDS) | Support | |
Wireless Intrusion Prevention System (WIPS) | Support | |
Bluetooth | iBeacon | Support |
Routing | IPv4 address | Static IP address or DHCP reservation |
IPv6 CAPWAP tunnel | Support | |
ICMPv6 | Support | |
IPv6 address | Manual or automatic configuration | |
Multicast | Multicast to unicast conversion | |
Management and Maintenance | Network management | SNMP v1/v2C/v3, Telnet, TFTP, Web management |
One-click Optimization | Support | |
(need to integrate with WIS) | ||
Fault detection and alarm | Support | |
Cloud AC management | Support | |
Statistics and logs | Support | |
FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. | |
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. | ||
External Characteristics | Lock | Support |
LED Indicators | 1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode) | |
Relevant Standard | Wi-Fi Alliance Certification | Support |
Safety Standard | GB4943, EN/IEC 60950-1 | |
EMC Standard | GB9254, EN301 489 | |
Health Standard | EN 62311 | |
Radio Standard | EN300 328, EN301 893 | |
Vibration Standard | IEC60068 2-31, ETSI EN300 019, | |
NEBS GR-63-CORE | ||
Dimensions (W x D x H) (mm) | 180 × 180 × 20 | |
Specifications | (Height of AP only, excluding case and mount kit) | |
Weight | 0.37kg | |
Work Environment | Temperature | Operating Temperature: -10°C to 50°C |
Storage Temperature: -40°C to 70°C | ||
Humidity | Operating Humidity: 5% to 95% (non-condensing) | |
Storage Humidity: 5% to 95% (non-condensing) |
Ruijie RG-AP810-L V3 je cenově nejvýhodný WiFi AP s Wi-Fi6, duálním rádiem a dvoupásmovým designem. Je vhodný pro malé a střední podniky, ale disponuje i funkcemi a vysokým výkonem pro nasazení ve velkých podnicích.
Ruijie RG-AP820-L V3 je vysoce výkonný cenově výhodný WiFi AP s Wi-Fi6, duálním rádiem a dvoupásmovým designem. Je vhodný pro malé a střední podniky, ale disponuje i funkcemi a vysokým výkonem pro nasazení ve velkých podnicích.
Ruijie AP210-L je přístupový bod určený pro malé podniky.